合肥开比锐精机科技有限公司,多晶硅破碎机,多晶硅辊式破碎机,多晶硅颚式破碎机,多晶硅筛分机,多晶硅振动筛,多晶硅自动化生产线,单晶硅破碎机,单晶硅辊式破碎机,单晶硅颚式破碎机,单晶硅筛分机,单晶硅振动筛,单晶硅自动化生产线
产品中心
当前位置: 首页  >   产品中心  >   2DPG系列辊式破碎机
2DPG系列辊式破碎机
Roller crusher

产品简介

2DPG系列辊式破碎机是专门针对多晶块状料和单晶边皮料破碎需求研制开发的系列机型。工作时,两辊相向回转,对进入辊缝的物料实施破碎。根据不同的入料和出料粒度要求,辊面有齿式、槽式、光面等多种形式供选择,也可组合配置成4辊机型。

产    量:2DPG系列机型可满足1-8t/h破碎需求。

进料粒度:多晶硅150mm左右块状料,单晶边皮料。

出料粒度:可满足拉单晶多次加料50mm以下的需求,也可满足连续拉晶20mm以下的需求。

 

2DPG series roller crusher is a series of models specially developed for the crushing requirements of polycrystalline block materials and single crystal edge materials. During operation, the two rolls rotate in opposite directions, and the material entering the roll gap is broken. According to different feeding and discharging granularity requirements, the roller surface has various forms such as tooth type, groove type and smooth surface, and can also be combined into a 4 rollers type.

Capacity: 2DPG series models can meet the crushing demand of 1-8t/h.

Input particle size: polycrystalline silicon 150mm block material, single crystal edge leather.

Output particle size: It can meet the demand of 50mm or less for multiple feeding of single crystal, and can also meet the requirements of continuous drawing of 20mm or less.

 


产品结构和性能特点

  • 两辊和破碎腔体均覆盖碳化钨硬质合金,无金属裸露,破碎过程无其它金属污染,破碎过程金属摄入量低;
  • 破碎腔体密封可靠,隔绝外界污染源;
  • 辊齿设置合理,出料成品率高,出料形态好、片状料少;
  • 两辊间距可调节,以满足不同出料粒度的需求;
  • 破碎辊子转速可调节;
  • 设置过压保护装置,当两辊进入异物或喂料量过大时,辊子可后退,保护机器不受损伤
  • 轴承、减速机等部件设计安全系数大,选用国际一流品牌产品,可确保设备长期稳定运行;
  • 设置有检修门,检修维护方便;
  • 设置有轴承温度检测和自动润滑装置,降低人工维护工作量。

 

  • The two rolls and the crushing chamber are covered with tungsten carbide cemented carbide, no metal leakage, no other metal pollution during the crushing process, and low metal intake during the crushing process;
  • The crushing chamber is sealed reliably and is isolated from external sources of pollution;
  • The setting of the roller teeth is reasonable, the yield of the discharging material is high, the discharging form is good, and the sheet material is small;
  • The two rolls can be adjusted to meet different discharge particle sizes;
  • The crushing roller speed can be adjusted;
  • An overpressure protection device is provided. When the two rollers enter foreign matter or the feeding amount is too large, the roller can be retracted to protect the machine from damage;
  • Bearings, reducers and other components have a high safety factor. The selection of international first-class brand products ensures long-term stable operation of the equipment;
  • It is equipped with an access door for easy maintenance and repair;
  • It is equipped with bearing temperature detection and automatic lubrication to reduce the amount of manual maintenance.

 

注:图片仅供参考,后续机型有多处优化
©Copyright 2016-2018 合肥开比锐精机科技有限公司 版权所有 皖ICP备17023668号
技术支持: 字母科技