合肥开比锐精机科技有限公司,多晶硅破碎机,多晶硅辊式破碎机,多晶硅颚式破碎机,多晶硅筛分机,多晶硅振动筛,多晶硅自动化生产线,单晶硅破碎机,单晶硅辊式破碎机,单晶硅颚式破碎机,单晶硅筛分机,单晶硅振动筛,单晶硅自动化生产线
产品中心
当前位置: 首页  >   产品中心  >   DPE系列颚式破碎机
DPE系列颚式破碎机
Jaw crusher

产品简介

DPE系列颚式破碎机是针对多晶/单晶棒料和大块料破碎需求研制开发的系列机型,结合硅料破碎的行业特点和要求,在传统机型的基础上做了多处优化。

颚式破碎机主要运用挤压的破碎机理,工作时,活动颚板相对固定颚板作周期性的往复运动,物料在两颚板间受到挤压、劈裂、冲击作用而被破碎,已被破碎的物料靠重力作用从排料口排出机体。

产    量:DPE系列机型可满足1-8t/h破碎需求

进 料:多晶硅棒料、大块料、单晶头尾料

出料粒度:20-110mm(可调节)

 

DPE series jaw crusher is a series of models developed for the requirements of polycrystalline/single crystal bar and bulk crushing. Combined with the industry characteristics and requirements of silicon crushing, it has been optimized on the basis of traditional models.

The jaw crusher mainly uses the crushing mechanism of extrusion. When working, the movable jaws are periodically reciprocated relative to the fixed jaws. The material is crushed by crushing, splitting and impact between the two jaws. The broken material is discharged from the discharge port by gravity.

Capacity: DPE series models can meet the crushing demand of 1-8t/h.

Input particle size: Polycrystalline silicon bar, bulk material, single crystal headstock.

Output particle size: 20-110mm (adjustable).

 

产品结构和性能特点

  • 破碎腔体碳化钨硬质合金全覆盖,无金属裸露,破碎过程金属摄入量低;
  • 腔体密封特殊设计,无其它异物进入破碎腔体污染硅料;
  • 出料口可调节,以调节出料粒度;
  • 检修维护方便;
  • 设备运行可靠。

 

  • The crushing chamber is covered with tungsten carbide hard alloy, no metal leakage, and the metal intake in the crushing process is low;
  • The cavity seal is specially designed, and no other foreign matter enters the crushing cavity to contaminate the silicon material;
  • The discharge port can be adjusted to adjust the discharge granularity;
  • Easy maintenance and repair;
  • The equipment is reliable.

 

注:图片仅供参考,后续机型有多处优化
©Copyright 2016-2018 合肥开比锐精机科技有限公司 版权所有 皖ICP备17023668号
技术支持: 字母科技